An efficient method of generating vortex electromagnetic wave based on double‐layer transmissive metasurface

A broadband double‐layer transmissive metasurface (TMS) for effective generate vortex electromagnetic wave is presented in this paper. The proposed TMS consists of two types of elements. The first element is composed of a multi‐resonant dipole and four metal vias. The metal vias increase the coupling strength between the upper and lower layers to improve transmission efficiency. On the basis of the first element, the second element adds stubs to ensure sufficient phase shift. The far‐field cross polarisation is eliminated by special element arrangement. Then, a centre‐fed linear polarisation TMS is designed to generate orbital angular momentum beams with mode l = ? 1. The proposed TMS is designed, manufactured and measured to verify the proposed design. The measured results indicate that a maximum gain of 20.8 dBi and narrow divergence angle of ±5° are achieved at 18 GHz. Furthermore, mode purity is higher than 86.1% within the 17 to 19 GHz band. The proposed double‐layer TMS saved costs, reduced weight and without assembly error is a good candidate for OAM generator.     

Zone model predictive control for pressure management of water distribution network

In the water distribution network (WDN), although the water demand of the node is changing constantly, the water quantity and water pressure of the node need to be met at each moment. To realize energy saving and consumption reduction, it is proposed to control the nodal water head of WDN in an appropriate narrow range. The frequent large fluctuation of the water demand, which may lead the water pressure exceed the expected range, increases the difficulty of the zone control. To realize optimized WND control, a novel zone predictive control is proposed, where two switching cases are considered. The switching condition is whether there are feasible solutions to keep the pressure within the expected region over the prediction horizon. When the condition is satisfied, the controller minimizes the variation of inputs with constraints of pressure range for ensuring the tank level staying within the expected zone and obtaining optimal economic cost. When the current pressure is out of the expected region or the condition is not satisfied due to the large variation of water demand, a reference trajectory of outputs is introduced, which is combined with the inputs as an optimization variable, and the constraints of expected zone are moved from the output to the introduced reference trajectory. Through minimizing the distance between reference trajectory and output, the controller will keep the tank level from deviating too far from the expected zone and will drive the tank level rapidly into the expected zone once the tank level exceeds the expected range. An application of the proposed zone MPC to WDN in Shinan District of Shanghai is given to illustrate its effectiveness.     

Flame Retardancy and Mechanical Properties of Bio‐Based Furan Epoxy Resins with High Crosslink Density

This work outlines an interesting approach to bioepoxy resins from sustainable 2,5‐bis((oxiran‐2‐ylmethoxy)methyl)furan (BOF). The 3,3′‐diamino diphenyl‐sulfone (33DDS) and 4,4′‐diamino diphenyl‐sulfone (44DDS) are employed as hardeners. For comparison, petro‐based networks from diglycidyl ether of bisphenol A (DGEBA) are developed as well. The systematic analyses suggest that the BOF/DDS networks show higher crosslink densities and mechanical properties than DGEBA/DDS thermosets. Remarkably, an attractive multilayer tubular microstructure is fabricated in the BOF/44DDS thermosets, and it greatly enhances the mechanical performance. Apart from that, BOF/DDS composites exhibit excellent flame retardancy. Especially, for BOF/44DDS, the self‐extinguishment happens in 7 s. The fire retardant mechanism confirms that a low heat release rate and heat release capacity as well as a compact char layer occur in the pyrolysis of BOF/DDS. Thus, the BOF/DDS exhibits superior performance over its DGEBA counterparts and meets a wide variety of requirements in engineering.     

高速激光热丝钎焊表面成形质量的控制

高速激光钎焊会引起熔池流动紊乱导致焊缝成形质量恶化,从而限制了其在汽车制造领域的应用。通过正交试验研究了高速下激光功率、送丝角度等工艺参数对焊缝成形质量的影响,发现焊缝成形质量随激光功率增加和送丝角度减小而提升。激光功率是通过影响熔池获得的热输入,从而影响熔池表面扰动的铺展来影响焊缝成形质量的。送丝角度是通过影响焊丝送入熔池的位置,从而影响焊丝对熔池的扰动强度和扰动的铺展速度来影响焊缝成形质量的。采用正交试验获得的最优工艺参数组合进行试验,获得了表面光滑平整无缺陷的高质量焊缝,为激光钎焊在高速下的应用发展奠定了基础。     

反应磁控溅射(CrMoTaNbVTi)N多主元薄膜的微观组织与机械性能研究

本文采用直流反应磁控溅射方法，通过溅射（CrMoTaNbV）镶嵌靶和纯Ti靶制备了(CrMoTaNbVTi)N多主元氮化物薄膜。研究了不同氮气流量比RN对(CrMoTaNbVTi)N薄膜的微观结构、力学性能和摩擦学性能的影响。结果表明，当RN=0% 和10%时薄膜为简单的体心立方结构，当RN=20%、30% 和40%时为简单的面心立方结构。随着氮气流量比RN的增大，表面颗粒逐渐减小，断面柱状晶更为致密，同时(CrMoTaNbVTi)N薄膜的残余应力、膜基结合力、硬度和弹性模量逐渐增大，且当RN=40%时达到最大值，分别为-3.3 GPa, 352 mN, 25.6±1.2 GPa 和 278.8±11.2 GP。RN =40%制备的氮化物薄膜具有最小的比磨损率，相较合金薄膜降低了约1个数量级，表现出优异的耐磨损性能。     

Self-activated persistent luminescence from Ba2Zr2Si3O12 for information storage

Till now, many doped persistent luminescence (PersL) phosphors have been investigated and found various applications in such as bioimaging, photocatalysis and information storage, but introducing PersL emitters into a proper host is mostly complex. In this research, a self-activated PersL phosphor Ba₂Zr₂Si₃O₁₂ (BZSO) is prepared by solid state reaction. By adding NH₄Cl, the self-activated PersL intensity is evidently enhanced. The trap depths and concentrations are examined by thermoluminescence spectra. Meanwhile, Bi³⁺ ions are introduced into BZSO and show wide band photoluminescence (PL) from 300 to 600 nm. Moreover, the PL of Bi³⁺ is tunable under excitation by 265-350 nm lights. Furthermore, as a proof-of-concept design, we designed a patterned quick response (QR) code based on the self-activated PersL of BZSO, and the information of “South China University of Technology (SCUT)” can be read out by the code scanning technology. Bi³⁺-doped BZSO phosphors are suggested to provide potential applications in information storage by its self-activated PersL, and to excite researchers to study the tunable PL in Bi³⁺-doped phosphor.     

Characterization of the structure and diffusion behavior of calcium alginate gel beads

A simple and novel method using gel shrinkage to indirectly characterize the structure of calcium alginate gel (CAG) beads during the calcium alginate gelation process was presented in this study. The effect of preparation process parameters (gelling cations, bead diameter, and alginate M _w and concentration) on the structure of the CAG bead formation process was thoroughly investigated. It was found that (a) the concentration of the Na⁺ and Ca²⁺ ion in gel bath was found to be the determining factor in the gel structure formation process by regulating the dissociation of alginate and the complexation of the calcium; (b) Na⁺ acts as a competitor with calcium and a screen in the electrostatic repulsion; (c) the effect of beads size below 700 μm on the structure of CAG beads can be neglected; and (d) the sodium alginate concentration has no significant effect on the gel formation process. Furthermore, the diffusion of bovine serum albumin (BSA) was controlled by the density of CAG bead. Consequently, a faster diffusion rate of BSA within the looser structure of beads can be observed. These results are keys to understanding the behavior and performance of beads in their utilization medium. © 2020 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48923.     

基于工业机器人的液压支架导向套柔性制造系统

自动化技术在小批量多品种的产品制造中，存在兼容难、换产时间长、人工干预多等问题，导致生产线难以高效率运行。设计的柔性制造系统，在充分分析了导向套不同结构、不同规格的基础上，以一套六关节机器人和行走地轨作为物流搬运设备，同时负责3台数控设备、自动辊道上料设备、自动堆垛下料设备、翻转机构、打标机构及抽检机构的上下料，并通过使用机器人双工位卡爪、机床六爪卡盘、自动刀补等卡具及技术，实现了一键换产，极大提高了制造系统的柔性。     

苯并噁嗪树脂的合成及在形状记忆聚合物中的应用研究进展

苯并噁嗪树脂作为一类新型的热固性树脂，具有分子设计性强、阻燃性能和耐腐蚀性能优异、固化时不需要强酸、无小分子放出等优点，在航空、建筑、电子等领域获得了广泛应用。本文主要介绍了苯并噁嗪单体的合成方法（溶剂法、无溶剂法和悬浮法）、降低苯并噁嗪开环聚合温度的方法（合成具有特殊基团的苯并噁嗪单体、添加催化剂）及苯并噁嗪树脂在形状记忆聚合物中的应用（与其他聚合物混合，纯苯并噁嗪化学改性），对苯并噁嗪形状记忆聚合物目前存在的问题进行了概述并对苯并噁嗪形状记忆聚合物的发展前景做出了展望。     

不锈钢表面阻氢涂层研究进展

不锈钢是高压氢系统的常用材料，在氢能储输技术中发挥重要作用，但高压氢环境引起的塑性降低、疲劳裂纹扩展速率加快等不锈钢氢脆问题，严重阻碍了氢能的产业化发展，在不锈钢材料表面制备阻氢涂层是解决不锈钢氢损伤问题的重要手段之一。本文首先综合介绍了典型涂层材料的应用特点及阻氢性能，探讨了制备工艺对涂层阻氢性能的影响、不同涂层材料的阻氢机理，并分析了涂层阻氢性能影响因素，之后总结了涂层阻氢性能评价方法及各种评价方法的优势与不足，并根据各种评价方法的技术特点，指出每种方法的适用范围。最后，基于阻氢涂层研究进展，文章提出以开发新型涂层结构为研究重点，同时加快新型涂层材料的探索，并重点关注涂层氢环境原位性能评价方法的研究。